Certified Wireless Design Professional (CWDP) Practice Exam – All Questions

Browse all practice questions for the Certified Wireless Design Professional (CWDP) Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Start practice test Flash cards

Mastering Multicasting for Live Video Streaming in WLANs What capability should be configured in WLANs for live video streaming to multiple recipients?Balancing the Wireless Connection: Understanding Link ImbalanceWhat is a common cause of link imbalance between a client and an AP?Boost Your Roaming Efficiency in Wireless NetworksIn a multiple channel architecture network supporting 802.1X authentication, which design aspect affects client roaming efficiency?Boost Your Signal Gain with Chip-Based TxBF and MRCWhat is the maximum theoretical signal gain using chip-based TxBF and MRC features compared to a 1x1 configuration?Boost Your Throughput by Understanding Receive Diversity in Low SNR EnvironmentsWhich method improves throughput in a low SNR environment?Boost Your Wireless Performance with a Stronger SignalWhich configuration approach is most advised when client devices are operating at lower PHY rates?Boosting Bandwidth: The Power of More Access PointsWhat network configuration would likely benefit clients needing higher bandwidth in dense environments?Boosting Web Proxy Server Performance for an Enhanced Guest ExperienceWhat benefit does enhancing performance of web proxy servers in the DMZ provide for guest users?Boosting Wireless Network Capacity: Smart Strategies That WorkTo increase capacity in a coverage-based wireless network, which of the following methods are recommended?Building a Reliable Wireless Network for EnterprisesWhich considerations are essential for designing a high-uptime wireless network for enterprise customers?Calculating Transmit Power for Certified Wireless Design ProfessionalsGiven a desired EIRP of 21 dBm, with an antenna gain of 5.85 dBd connected through cable loss, what should the AP transmit power be?Challenges in Shifting to a Distributed WLAN ArchitectureWhich issue may arise when changing the data forwarding model from centralized to distributed in a WLAN architecture?Choosing the Right Antenna for High Ceiling Access PointsWhat is the most suitable antenna option for APs mounted on ceilings higher than 20 feet?Choosing the Right Antenna for High-Mounted WLAN Access PointsWhat is the most suitable antenna option for a WLAN infrastructure with ceiling-mounted APs over 20 feet high?Choosing the Right Antenna for Long-Range Outdoor LinksYou are creating an outdoor bridge link that spans more than 1000 yards. Which antenna type is more likely to be included in the design?Choosing the Right Cabling for MultiGig Connections: Why Cat-6a Reigns SupremeWhich cabling type is the best choice for supporting MultiGig connections over longer distances?Choosing the Right Chart for Bridge Link Antenna DeploymentWhat chart should you request from antenna vendors when selecting external antennas for bridge link deployment?Common Guest Issues in Corporate WLAN NetworksWhat is a common issue that must be addressed for guests using a corporate WLAN?Decoding the DSCP Classification for 802.11 AC_VO Priority LevelWhat is the DSCP classification equivalent for the 802.11 AC_VO priority level?Designing an Efficient Guest Network for Large EnterprisesWhich factors are considered key features when designing a guest network for a large enterprise?Enhancing Stadium Aesthetics with Wireless Design IntegrationWhat common installation technique can be used to meet aesthetic requirements in a stadium?Enhancing VoWiFi Call Quality: A Guide to 5 GHz ImplementationTo address RF interference causing dropped VoWiFi calls, what should an implementer do?Enhancing WLAN Performance in High-Density AreasHow does increasing the number of APs affect a WLAN in a high-density area?Ensure Wireless Security: Understanding the RADIUS Shared SecretIn testing clients' association capabilities with a RADIUS server, what should you validate first if none can associate successfully?Ensuring Safety in Wireless Design: The Importance of PPEYou are conducting a physical site survey where heavy machinery is repaired. What is a common requirement for this type of survey?Essential Deliverables After Implementing WLAN InfrastructureWhat is a deliverable to a customer after successfully implementing a WLAN infrastructure?Essential Lightning Surge Suppression for Outdoor Antenna InstallationsWhat type of protection should be included in outdoor antenna installations?Essential Pre-Deployment Steps for Access Points in Wireless NetworkingWhat should always be performed before an AP connects to the production network?Essential Steps for Evaluating Your WLAN DeploymentWhat action should be taken after implementing a WLAN based on the design developed from the site survey?Essential Tools for Accurate AP DeploymentWhich tools should be used to ensure the installation team deploys APs in their designed locations?Exploring Real-Time Location Systems (RTLS) and Sound TechnologyWhich of the following technologies can be employed in Real-Time Location Systems (RTLS)?Fast and Secure Roaming: Understanding 802.11-2016Which two types of roaming are specified in 802.11-2016 FT roaming that will help meet the goal of fast secure roaming?Finding the Right Antenna for Point-to-Multipoint LinksWhat type of antenna is suitable for a PtMP link in a square orientation of buildings?Getting to Know Priority Levels in VoWLAN DesignHow many distinct priority levels are generally expected for voice applications in a VoWLAN design?How Amplifiers Play a Crucial Role in WLAN Data RatesIn terms of data rates, what is the primary role of the amplifier in a WLAN setup?How Many Devices Can Two Access Points Support?What is the maximum number of device connections being supported by only two APs in the given scenario?How Museums Can Seamlessly Integrate Wi-Fi Access PointsHow can a museum ensure that Wi-Fi access points blend into their environment?How to Handle APs Installed Above CeilingsWhat should you do if APs were mounted above the ceiling without prior notification of aesthetics constraints?How to Optimize Data Flow in Long-Distance 802.11 Bridge LinksWhen deploying long-distance 802.11 bridge links, which parameter can improve data flow by reducing retries caused by distance?How to Prevent Misconnections in Your Wireless NetworkWhat is an effective solution for users frequently connecting to the wrong network?How to Reduce Co-Channel Interference in WLANsTo minimize the impact of CCI in the 2.4 GHz band, what action should be taken if the WLAN was not configured correctly?Identifying the Need for a Post-Installation Survey in Wireless NetworksWhat could indicate a need for a post-installation survey?Integrating Access Points Seamlessly in Design SpacesTo ensure APs blend into the museum's design, what action should be taken?Integrating Wireless Technology into Museum DesignWhat is a suitable solution for blending Access Points (APs) into a museum's design?Key Considerations for Outdoor Point-to-Point Link DesignWhen designing a PTP outdoor link, which factors related to vegetation should be considered?Key Factors to Consider When Choosing a Site Survey AdapterWhat should be considered when selecting a site survey adapter?Master the Art of Configuring Simulated APs in Predictive ModelingWhat is a best practice for configuring simulated APs in predictive modeling software?Master the Minimum RSSI for VoWLAN PerformanceWhat is the minimum RSSI value required for a VoWLAN system that requires 25 dB of SNR, given a noise floor of -88 dBm?Master Your Indoor Wireless Network Design SkillsWhat is a best practice for indoor predictive site survey configuration?Mastering 2.4 GHz Wi-Fi: Avoiding Channel Overlap for Optimal PerformanceIf overlapping channels are detected on the 2.4 GHz band, what action should be taken?Mastering 802.11n: Understanding the Essentials for Achieving 450 MbpsTo achieve a 450 Mbps MCS, which 802.11n features are required?Mastering Access Point Placement for Optimal Wireless Network PerformanceWhat is a significant factor in choosing AP locations based on predictive designs?Mastering Attenuation Measurements for Wireless DesignWhat is the best method of gathering attenuation measurements from any building materials or objects?Mastering Band Steering for Better WLAN PerformanceIn what scenario would band steering be beneficial in a WLAN?Mastering Channel Management to Optimize Your 2.4 GHz NetworkWhat should you do to prevent overlapping channels being used on the 2.4 GHz band?Mastering Client Device Simulation in Site Survey SoftwareWhy might you choose to simulate client devices in site survey software?Mastering dBm Conversion: A Guide for Wireless Design ProfessionalsA radio system transmitting at 40,000 Watts can be converted to which dBm value?Mastering DHCP Management in High-Density Wireless NetworksWhat setting is effective for managing DHCP addresses in high density areas?Mastering Efficient Cell Overlap in VoIP Site SurveysWhich strategy ensures efficient cell overlap for VoIP site surveys?Mastering EIRP Calculation: Key to Wireless Design SuccessIf APs have an antenna gain of 3 dBi and are set to a transmit power of 25 mW, what should be the EIRP?Mastering Encryption Standards for Office Extension Access PointsWhich encryption standards are used by office extension APs for traffic tunneling?Mastering Latency in VoIP Across WLANsWhen assessing VoIP across WLANs, which metric is crucial for survey and design?Mastering Multicasting: The Key to Efficient Wireless Video StreamingWhen using live video streaming solutions transmitting to multiple recipients, what capability should be configured in WLAN implementations?Mastering Network Design Constraints: A Key to SuccessWhich of the following could be considered constraints when performing a network design?Mastering Project Management: The Power of Work Breakdown StructuresWhat does a Work Breakdown Structure help project managers achieve?Mastering Quality of Service for Your WLAN ManagementWhich feature is critical in managing mobile devices across a WLAN?Mastering RF Coverage Simulation: The Key Role of CalibrationWhen simulating RF coverage, what step is often missed if results differ greatly from a walkabout?Mastering RF Data Accuracy in Floor Plan Site SurveyingWhich method will lead to the most accurate RF data when preparing a floor plan for site surveying?Mastering RF Fingerprinting for WLAN Location TrackingWhat method is typically used by location algorithms to determine location within a WLAN coverage area?Mastering RF High Availability: The 100% Overlap ApproachWhat is a method of providing RF high availability?Mastering Seamless Roaming in WLANs with Fast Transition ProtocolsWhat technology is typically used for seamless client roaming in WLANs?Mastering the 2.4 GHz Band: Channel Assignment Tips for Peak PerformanceWhat should be configured to optimize performance when utilizing automatic channel assignment?Mastering the 2.4 GHz Band: Effective WLAN Channel StrategiesHow can overlapping channels on the 2.4 GHz band be prevented in a WLAN?Mastering the Basics of RF Math for Wireless DesignWhat basic RF math formula should be used as a baseline to convert an RF value in units of dBm into a value of mW?Mastering the Bill of Materials for Your WLAN DeploymentWhich document provided to your customer should include all devices and parts that are going to be used during the deployment of their WLAN infrastructure?Mastering the Control Plane in Wireless NetworksWhat functions do the control plane of centralized and distributed WLAN architectures address?Mastering the Essentials of Wireless Site SurveysWhich of the following denotes an essential factor to consider when performing a wireless site survey?Mastering the Installation of Cloud-Based Access PointsWhat is the most common process when installing a cloud-based AP?Mastering the Management Plane in Wireless NetworksWhich operational plane primarily interacts with a Wireless Network Management System (WNMS)?Mastering the Physical Installation Guide for Access PointsWhat document should be created that provides instructions for install technicians to mount and configure APs?Mastering User Surveys for Optimal WLAN PerformanceTo maintain user experience, how often should end-users be surveyed post-WLAN deployment?Mastering VoWiFi Security Solutions: Why WPA2-Personal Reigns SupremeWhat security solutions are ideal for protecting VoWiFi communication in an RSN requiring low-latency reassociations?Mastering Wireless Client Bridges for Student WorkstationsFor managing student workstations wirelessly while ensuring ubiquitous access, what is the recommended deployment option?Mastering Wireless Coverage in Warehouses: An Essential GuideWhat is the best recommendation for providing wireless coverage to the central area of a warehouse with metallic storage racks?Mastering Wireless Design: Navigating 802.11n EnhancementsIn a facility with highly reflective materials, which 802.11n enhancement should not be enabled on the 2.4 GHz radio?Mastering Wireless Design: Unpacking 802.11n and 802.11acWhat advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devices?Mastering Wireless Performance Monitoring: The Key to Post-Deployment SuccessHow often should wireless performance be monitored post-deployment?Mastering Wireless Performance: The Role of Receive DiversityWhich method is known to improve throughput in a low SNR environment?Mastering WLAN Channel Planning: Evaluating EffectivenessHow do you determine the effectiveness of channel planning in WLAN environments?Mastering WLAN Controller Redundancy: The Role of ClusteringWhich option is a common approach to provide redundancy for WLAN controllers?Mastering WLAN Design for Cost-Effective Telnet Client SolutionsWhen designing a WLAN for Telnet clients with cost concerns, which factor is important to consider?Mastering WLAN Design for Seamless Voice CommunicationWhen designing a WLAN to support voice in a large office, which design element is of the highest concern for performance?Mastering WLAN Design: The Best Validation Method Before DeploymentWhat is the best method to validate predictive WLAN design before deployment?Mastering WLAN Environments: The Directional Antenna AdvantageWhat method can be used to minimize interference in a dense WLAN environment?Mastering WLAN Performance by Understanding Data Rate ThresholdsWhat key element must be evaluated when adjusting client device settings for optimized WLAN performance?Mastering WLAN Performance: Essential Strategies for High-Density EnvironmentsWhat should be the first step to improve WLAN performance in a crowded auditorium with too many client devices?Mastering WLAN Performance: The Key to Wireless SuccessWhich method is an effective technique for optimizing WLAN performance?Mastering WLAN Security: The Importance of Validating Server CertificatesWhen configuring an EAP type, which feature should be enabled to ensure WLAN security?Mastering WLAN Security: The Key Role of MAC FilteringWhat is the primary benefit of using MAC filtering in WLAN security?Mastering WLAN Security: Why Validating Server Certificates is EssentialAccording to best practices in WLAN security, what feature should be enabled when configuring an EAP type?Mastering WLAN Validation: The Power of AP-on-a-Stick SurveysWhat is the best way to validate a WLAN predictive design prior to deployment?Mastering WLAN: The Secret Sauce of Quality of Service for Voice TrafficWhat kind of QoS allows prioritization of voice traffic over data packets in WLANs?Maximizing Wireless Network Coverage: The Power of Access Point PlacementWhich factor optimizes wireless network coverage when implementing new access points?Maximizing WLAN Performance with Beamforming TechnologyWhat technology can help optimize the coverage and capacity of a WLAN in an enterprise environment?Maximizing Your 802.11ac AP: The Hidden Potential of a Disabled 2.4 GHz RadioIf the 2.4 GHz radio in an 802.11ac AP is disabled, what alternative use could it serve?Navigating Challenges in Site Surveys: Tackling High Noise LevelsWhat is one challenge of site surveys in environments with high noise levels?Navigating Roaming Issues: The Importance of Active Site SurveysWhat kind of site survey helps identify if roaming is working as designed?Navigating Site Surveys in Restricted Areas: Essential StepsWhat should you do to proceed with a site survey in restricted areas of a meat processing company?Navigating the Predictive Survey for 802.11n WLAN DeploymentsIf a company desires a dual-spectrum 802.11n WLAN supporting voice and location tracking, what type of pre-deployment survey is appropriate?Navigating the Shift from Centralized to Distributed WLAN ArchitecturesWhat issue may arise when changing from a centralized to a distributed data forwarding model in a WLAN?Navigating Wireless Security: The Role of WIPS in Protecting NetworksWhich functions can be performed by a Wireless Intrusion Prevention System (WIPS)?Optimize WLAN Performance in Your All-Wireless OfficeWhat configuration should be changed to improve WLAN performance in an all-wireless office setting?Optimizing Guest WLAN Design for IT Management EfficiencyWhat characteristic of a well-designed guest WLAN access is beneficial for IT management?Planning for Future Wi-Fi Growth: The Path to Scalability and FlexibilityWhat approach is best when planning for future Wi-Fi growth in a network?Planning Site Surveys: Prioritizing Data Compliance in Wireless DesignWhat is a critical need when planning a site survey in a business environment?Prioritizing Connectivity: The Key to Smooth Video Calls Over WLANTo ensure high-speed connectivity for video calls over a WLAN, what technology is often adopted?Redesigning WLAN for Peak Performance: What You Need to KnowWhat is a primary consideration when redesigning a WLAN for increased capacity?Redesigning WLAN Infrastructure for Peak PerformanceWhat is the recommended action when a WLAN infrastructure struggles to support a high number of client devices?Redesigning Your WLAN Architecture for Better Network PerformanceWhat is the recommended first step in addressing network performance issues due to high client density?Research: Your Secret Weapon Before Meeting a CustomerWhat is crucial to do prior to meeting a customer for the first time?Scaling the Map: The Foundation for a Successful RF SurveyBefore conducting a pre-deployment passive RF survey, what is essential to accomplish?Securing Your Wireless Network: The Power of EAP-TLSYour customer is using PSK for authentication and requires a stronger solution. Which EAP type would be the best fit?Securing Your WLAN: The Role of DTLS ExplainedWhat's the primary benefit of using DTLS in WLAN setups?Should You Paint Your Access Points? Weighing Aesthetics vs. WarrantyWhat is a valid consideration when painting access points (APs) to meet aesthetic concerns?Stay Clear of Channel Interference: Designing for Airport ProximityWhen designing a static channel plan for an office near an airport, which range of channels should be avoided?The Benefits of Per-User PSKs in WPA/WPA2-Personal NetworksWhat is one reason per-user PSKs are advantageous in WPA/WPA2-Personal networks?The Essential Role of QoS in VoWLAN EnvironmentsWhich protocol would be critical for managing wireless traffic in an environment using VoWLAN?The Evolution of Wi-Fi: Understanding Mesh Networking and IEEE StandardsWhich IEEE standard introduced the concept of mesh networking in Wi-Fi?The Hidden Dangers of Close Proximity Access PointsWhat common issue arises when multiple access points are deployed in close proximity to each other?The Hidden Interference: Why Your Wi-Fi Might Struggle During LunchWhat is the likely cause of intermittent Wi-Fi connectivity in a break room during lunch time?The Hidden Risks of Increasing AP Output PowerWhat is a potential drawback of simply increasing the output power on APs?The Importance of Antenna Design for High InstallationsWhat is a key requirement when installing antennas on a 70-foot tower?The Importance of Backup Power Sources for Access Points in Data CentersWhen is it crucial to have a backup power source for APs?The Importance of Conducting an Active Site SurveyWhat is the purpose of conducting an active site survey?The Importance of Quality of Service (QoS) in WLAN ManagementWhich WLAN feature helps manage user priority and traffic during peak periods?The Importance of Signal-to-Noise Ratio in Indoor Wireless Network DesignWhich of the following metrics is most significant when designing an indoor wireless network?The Key to Successful WLAN Deployment: Understanding Performance IndicatorsIn deployment of a WLAN infrastructure, what is a sign of successful performance?The Key to Validating Your WLAN Design: AP-on-a-Stick Survey ExplainedAfter designing a WLAN infrastructure, what is the best way to validate the predictive design?The Perks of a Single SSID for Guest Access in Network DesignWhat is one advantage of designing guest access with all guest users tunneled directly into the DMZ?The Perks of Managed WLAN Solutions: A Deep DiveWhich of the following is a benefit of a managed WLAN solution?The Power of Tunneling Guest Users into the DMZ in WLAN DesignWhy is tunneling guest users directly into the DMZ beneficial in WLAN design?The Role of the Control Plane in Automated RF Management for WLANsWhat part of the WLAN architecture helps in automated RF management?The Smart Way to Measure Ceiling Height Without a LadderWhat is the most cost-effective method to measure ceiling height without using a ladder?The Unique Characteristics of a 20 Degree Vertical Yagi AntennaWhat type of antenna produces a nearly circular azimuth pattern but a flat donut shape elevation pattern?The Vital Role of a RADIUS Server in WLAN InfrastructureWhat is the primary role of a RADIUS server in a WLAN infrastructure?Troubleshooting 802.1X/EAP Authentication: Key Checks for a Smooth Client ConnectionDuring a post-validation assessment, what should be checked if a client is not passing 802.1X/EAP authentication?Troubleshooting WLAN Issues in a Warehouse: What's Your Focus?If a warehouse WLAN is experiencing issues, what should be a primary consideration during troubleshooting?Understanding 3x3:3 Radios and 256 QAM in WLAN UpgradesWhich type of client device is likely to support 3x3:3 radios and 256 QAM in a WLAN upgraded to 802.11ac?Understanding 5 GHz Band Challenges for Wireless LaptopsWhat might prevent a customer's 802.11n laptop from seeing the SSID in a 5 GHz band?Understanding 40 MHz Channel Configurations in the 2.4 GHz ISM BandWhat is a valid 40 MHz channel configuration in the 2.4 GHz ISM band where channels 1-11 are permitted?Understanding 802.1X/EAP Preauthentication in WLANsIf a STA configured for 802.1X/EAP preauthentication detects a new BSS with a different IP subnet, what is likely to occur?Understanding 802.11 Admission Control in WLANsWhat is the function of 802.11 admission control in a WLAN?Understanding 802.11ac: WMM and WMM-PS ExplainedWhat type of standards can 802.11ac support?Understanding 802.11d and 802.11h in Wireless NetworkingWhich two 802.11 amendments deal with regulatory and transmission requirements?Understanding Access Categories in VoWLAN InfrastructureWhen deploying an Enterprise-class VoWLAN infrastructure, which Access Category should voice packets utilize?Understanding Access Points in Wireless DesignHow many APs are initially present in the auditorium?Understanding Antenna Connectors: Why the RP-TNC is Your Best BetOf the following antenna connector types, which one is the smallest?Understanding Antenna Return Loss: A Guide for CWDP AspirantsWhat is the actual return loss of the antenna with a measured value larger than 20 dB and a cable loss of 2.5 dB?Understanding Antenna Types for High Gain: Choosing the Right OneTo achieve a gain of 35 dBi for an antenna, which antenna type should be used?Understanding Band Steering Algorithms for Better ConnectivityWhy should band steering algorithms allow connections to the 2.4 GHz band after ignored Probe Requests?Understanding Bandwidth Needs: Why Video-on-Demand Tops the ListWhat type of application requires high bandwidth and low to medium Wi-Fi loss with moderate latency and jitter tolerance?Understanding Bluetooth Interference in Wireless SystemsWhat must be considered when using Bluetooth in conjunction with other wireless technologies?Understanding Business Requirements for Network DesignWhich of the following does NOT represent a business requirement for a new network design?Understanding Centralized Data Forwarding in VoWLAN DesignIn a VoWLAN design, what does centralized data forwarding mean concerning the WLAN controller?Understanding Channel Utilization for Wireless NetworksWhen analyzing channel utilization, what condition should be avoided for optimal performance?Understanding Client Association in Single Channel ArchitectureUsing a SCA means that all APs will be using the same channel in a given layer. How is the AP with which the client associates determined?Understanding Constraints in Network Design for CWDP SuccessWhich of the following could be constraints in network design?Understanding Coverage-Based Wireless NetworksA wireless network with fewer APs at higher power levels to cover a large area is classified as which of the following?Understanding DHCP Option 43 for Wireless Network APsWhich DHCP option must be configured to help APs locate their wireless LAN controller?Understanding DTLS: A Key Encryption Method for Access PointsWhich type of standards-based encryption is used by office extension APs for the traffic tunnel?Understanding Duty Cycle: A Key Metric for AP DeploymentWhat portion of a spectrum analyzer view can be used to determine if a given channel is too active for use as the active channel for a new AP?Understanding Dynamically Assigned IP Addresses with Lightweight APsWhat is the association of dynamically assigned IP addresses with lightweight APs and their connected VLANs?Understanding EAP-TLS: Your Key to Robust Wireless SecurityWhat EAP method is suitable for a security solution requiring client credentials and server certificates?Understanding EAPOL: The Backbone of Wireless AuthenticationHow are EAP messages primarily transported over 802.11 wireless LANs?Understanding EIRP: A Key Concept for Wireless Design ProfessionalsWhat would be the EIRP of APs if the antenna gain is 3 dBi and transmit power is set to 25 mW?Understanding Encryption in Wireless Networks: Why DTLS MattersWhat type of encryption is used by office extension APs for traffic tunneling?Understanding Essential Elements of Post-Deployment Review in Wireless DesignWhat is an essential element of a post-deployment review?Understanding Factors Affecting Wi-Fi Network Performance during Busy TimesWhich factor is not likely to affect the performance of a Wi-Fi network during peak usage times?Understanding Frame Check Sequences in RF NetworksIf data communication frames show an incorrect FCS, what does this indicate about the RF network?Understanding Frequency Bands in 802.11n Wireless StandardWhat frequency band does 802.11n utilize?Understanding High-Level Designs and Their Key AudiencesWhich audience type is not addressed in High-Level Designs (HLDs)?Understanding how WLAN controllers manage QoS priority in 802.11 framesHow does a WLAN controller mark an 802.11 frame for QoS priority when sending it to a lightweight AP?Understanding HR/DSSS PHY Rates: A Key to Wireless Design KnowledgeWhich PHY rates does HR/DSSS specify?Understanding Indoor Predictive Site Survey ConfigurationsWhich configuration should be avoided during an indoor predictive site survey?Understanding Input Power in Wireless Design: A Practical ApproachAn amplifier has a 1 dB compression point of 32 dBm and a gain of 20 dB. What is the highest average input power that would be safe for a 24 Mbps 802.11g signal?Understanding Jitter: The Key to Network PerformanceWhich statement regarding jitter is correct?Understanding Jitter: The Key to Smooth Network PerformanceWhich statement about jitter is true?Understanding Key Legal Concepts in Master Service AgreementsWhat are two common legal categories addressed in a Master Service Agreement (MSA)?Understanding Limitations in Locating 802.11 ClientsWhich factors may limit the ability to locate 802.11 clients without an 802.11 tag?Understanding Local MAC in Centralized WLAN ArchitectureWhat definition accurately describes the "local MAC" variation of the centralized WLAN architecture?Understanding Low Duty Cycle RF Signals and Their ImplicationsWhat does a low duty cycle RF signal suggest about external interference?Understanding Low Duty Cycle Signals in Wi-Fi NetworksWhat can be inferred about an RF signal with a very low duty cycle?Understanding Low RSSI Issues in Wireless NetworkingWhat is the most likely cause of low RSSI when a traveler connects to an AP in their hotel room?Understanding Low-Level Design: The Backbone of Routing ServicesIn a Low-Level Design (LLD) document, what device performs routing services?Understanding Mandatory Data Rates in 802.11n and 802.11ac StandardsWhat advantage provided by 802.11n and 802.11ac cannot be utilized in low-end client devices?Understanding Maximal Ratio Combining in 802.11n and 802.11ac TechnologiesWhich feature of 802.11n and 802.11ac is not applicable for low-end 1X1:1 client devices?Understanding Modulation in Wireless Communication: The Key to Data TransmissionWhat is modulation primarily defined as in wireless communication?Understanding Multicast Packet Delivery Support for VoWiFi ImplementationsWhich VoWiFi implementations frequently require multicast packet delivery support?Understanding Network Card Simulation in Site Survey SoftwareWhat is the purpose of the "Network Card Simulation" feature in site survey software?Understanding Network Issues for Voice-Enabled StationsIf a voice-enabled STA fails to maintain session due to a network issue, what might be the cause?Understanding Noise Figure in Amplifier DesignIf an amplifier has a noise figure of 10 dB and a gain of 0 dB, what is the total noise figure of the system?Understanding Noise Floor: A Guide for CWDP StudentsIf the thermal noise is at −174 dBm/Hz and a spectrum analyzer has a noise figure of 5 dB, what is the level of the noise floor?Understanding Non-Overlapping 40 MHz Channels in the 5 GHz SpectrumHow many non-overlapping 40 MHz channels can be used under the specified deployment conditions in the 5 GHz spectrum?Understanding OFDM in 802.11a Wireless NetworksWhat type of modulation is primarily used in 802.11a?Understanding Packet Error Rate in VoWLAN for Optimal Call QualityWhat is an acceptable packet error rate value to still provide acceptable call quality in a VoWLAN deployment?Understanding Passive RFID Tags in WLAN DesignWhen implementing passive RFID tags in a WLAN design for Real-Time Location Services (RTLS), what is true regarding their communication with the network?Understanding PEAP: The Security Layer for EAP in Wireless NetworkingWhich protocol is used to provide a security layer for EAP in wireless networking?Understanding Peer-to-Peer Blocking on Public HotspotsWhat feature on a public hotspot may prevent users from seeing other devices on their subnet?Understanding PHY Rates: Factors Influencing Device AdjustmentsWhat factors typically influence a device's decision to shift to lower PHY rates?Understanding PHY Rates: The Factors That MatterWhat factors influence a device’s decision to shift to lower PHY rates?Understanding PMK Caching: Boost Your Wireless ConnectivityHow does PMK caching improve wireless connectivity?Understanding PMK Caching: The Key to Smooth Wireless RoamingWhat roaming technology uses stored keys at the APs for roam back if a client STA returns after having roamed away?Understanding Poor RSSI in 5 GHz WLAN for 802.11n TabletsWhat is the cause of poor RSSI experienced by a 802.11n tablet in a 5 GHz-only WLAN?Understanding Power Levels in Wireless Signals: 802.11b vs 802.11gHow much more power can a 1 Mbps 802.11b signal have than a 54 Mbps 802.11g signal if sent through a saturated amplifier?Understanding Power over Ethernet Budget for Access PointsWhat is the minimum Power over Ethernet (PoE) budget required to support six access points using IEEE 802.3at?Understanding PPE for Installing Access Points at HeightsWhat is the most common PPE to be used when installing APs on high ceilings?Understanding QoS Markings in VoWLAN: Ensuring Voice Call QualityWhat is the likely cause of frames on the downlink not being transmitted with the correct UP value for voice frames during a voice call?Understanding Radar Detection in 5 GHz WLAN DeploymentsWhich 5 GHz bands should be avoided if radar has been detected in your WLAN deployment?Understanding Radar Pulse Detection Challenges for WLAN ProfessionalsWhat is a potential drawback of manually observing radar pulse presence with a spectrum analyzer?Understanding RADIUS: The Key to Secure WLAN AuthenticationWhat service must be implemented on your customers' network to authenticate users against an LDAP database prior to access to the WLAN infrastructure being granted?Understanding Radomes: Protecting Wireless CommunicationWhat is a radome?Understanding Real Time FFT Graphs in Wireless DesignWhat does a Real Time FFT graph illustrate?Understanding Real-Time Applications: The Backbone of Instant CommunicationWhat type of applications involve many communications back and forth between server and client with each transaction?Understanding Roaming and Throughput in Active Site SurveysDuring an active site survey, what other function is typically tested along with throughput?Understanding Routers in Wireless Network CommunicationWhat device is needed to enable communication between a controller and APs on different subnets?Understanding RSSI and SNR Calibration in Wireless CommunicationIn wireless communication, clients must be calibrated for RSSI and SNR reporting to which specific value?Understanding RSSI for Optimal VoWiFi ExperienceWhat minimum RSSI should you plan for in all areas being monitored for VoWiFi service?Understanding RSSI Values: Why They Matter in Wireless DesignWhy might client devices show lower RSSI values than during a site survey?Understanding RSSI: The Simplest Algorithm for Location in Wireless NetworksWhat metric implements the simplest algorithm and lowest accuracy in networks requiring locations?Understanding RSSI: The Simplicity Behind Location Tracking in Wireless NetworksWhich metric implements the simplest algorithm for location tracking in networks?Understanding RTS/CTS: The Key to Backward Compatibility in Wireless NetworkingWhat is the best protection mechanism for backward compatibility of 802.11n devices with 802.11b devices?Understanding Scope Creep in WLAN ProjectsIf a project sponsor requests that a WLAN supports RFID location tracking midway through a site survey, what situation does that indicate?Understanding Service-Level Agreements in Network ProjectsHow are service-level agreements (SLAs) generally utilized in network projects?Understanding Signal Gain in Wireless Design: TxBF and MRC ExplainedWhat is the maximum theoretical signal gain of chip-based TxBF and MRC when compared to a single antenna for transmit and receive?Understanding Signal Loss and Gain: A Practical ApproachWhat is the total loss/gain when a signal passes through a 10-meter cable with 4 dB loss per meter, an amplifier with 8 times gain, and a 5 dB lossy filter?Understanding Smart Client Association in WLANsWhat determines the AP with which a client associates in a WLAN using SCA?Understanding SSID in Wireless Networking: The Role of Association RequestsIn which type of frame is the SSID always included?Understanding the 802.11n MCS Rate for 3x3 ConfigurationsWhat is the maximum MCS rate supported by a 3x3 802.11n chip configured for a single-band 20 MHz channel?Understanding the 802.11y Standard: Frequency and Power EssentialsWhat frequency and power did 802.11y provide?Understanding the Benefits of Per-User PSKs over ESS-wide PSKsWhat benefits do per-user PSKs provide compared to ESS-wide PSKs?Understanding the Centralized Forwarding Requirement in WLANFor a WLAN employing centralized forwarding, what is a critical LAN requirement?Understanding the Chip Rate for 802.11b: What You Need to KnowWhat is the chip rate of 1 Mbps for 802.11b?Understanding the Control Plane: Key to Automated RF ManagementWhich operational plane is responsible for performing automated RF management?Understanding the Differences Between Wireless and Wired VLANsWhat is a notable difference between VLANs in wireless and wired domains?Understanding the Essentials of Master Service AgreementsWhich two legal categories does a Master Service Agreement (MSA) commonly address?Understanding the Friis Transmission Equation and Its Importance in Wireless CommunicationWhat is the purpose of the Friis transmission equation [(LdB) = 20 log(d) + 20 log (f) - 27.55]?Understanding the Goals of Pre-Deployment Meetings in Wireless DesignWhat is the primary goal during the first pre-deployment meeting with the deployment team?Understanding the Impact of 802.1X Authentication on WLAN DeploymentHow does 802.1X authentication influence WLAN deployment?Understanding the Impact of Excessive RTP Frame RetransmissionsWhat is a potential outcome of excessive uplink RTP frame retransmissions?Understanding the Impact of Frequency Bands on WLAN CoverageWhich factor most significantly impacts the overall coverage area of a WLAN?Understanding the Impact of Insufficient Access Points in WLAN DesignIn WLAN design, what is the primary consequence of having insufficient APs for the number of device connections?Understanding the Impact of People on Wi-Fi Signals in High-Density EnvironmentsIn high-density environments, what extra factor must be considered that can attenuate Wi-Fi signals during events?Understanding the Impact of the 802.11k Standard on Wireless NetworksWhat is the role of the 802.11k standard in wireless networks?Understanding the Impact of Uplink RTP Frame RetransmissionsExcessive uplink RTP frame retransmissions can result in ____________.Understanding the Impact of WMM-PS Certification on Wireless PerformanceWhat performance issue is likely with employees using both WMM-PS certified and non-WMM-PS devices?Understanding the Impact of WMM-PS on WLAN PerformanceWhat circumstance may arise with the mixed use of WMM-PS and non-WMM-PS client devices on a WLAN?Understanding the Importance of Read-Only Access in Network AnalysisFor what types of systems should read-only access be requested to analyze the existing infrastructure?Understanding the Importance of Site Surveys in WLAN DesignWhat is the first step in mitigating interference when planning a WLAN?Understanding the Importance of the Fresnel Zone in Wireless DesignA company seeks to connect its headquarters to a remote office 13 kilometers away using a wireless bridge. What requirement must not be forgotten when considering the Fresnel Zone?Understanding the Importance of the Project Charter in Wireless Design ProjectsWhat document is usually created to formally begin a project?Understanding the Importance of WMM in 802.11n WLANWhat limitation exists when WMM is not enabled on an 802.11n WLAN?Understanding the Importance of WMM in 802.11n WLANsWhat limitation exists when WMM is not enabled on an 802.11n WLAN?Understanding the Limitations of Automatic Channel Assignment in WLANsWhat is a potential limitation of the automatic channel assignment feature on a WLAN?Understanding the Limitations of Competitive Testing in Wireless DesignWhat is typically lacking in competitive tests published by equipment vendors?Understanding the Limitations of Independent Autonomous Architectures in Wireless NetworksWhich architecture suffers the biggest limitation for sharing control information across APs?Understanding the Power Requirements for Wireless Access PointsWhat is the minimum PoE budget needed on a switch to support 6 (six) APs that can only be powered using IEEE 802.3at?Understanding the Risks of Outdated Wireless InfrastructureWhat is an inherent risk in using outdated wireless infrastructure?Understanding the Role of HT-LTF in 802.11n Wireless NetworksIn which mode is the HT-LTF used to estimate the spatially multiplexed signal channel in 802.11n?Understanding the Role of Low Level Design in Network ConfigurationWhat type of document is commonly associated with a table of VLANs that includes the devices performing routing services?Understanding the Role of the Access Point in Wireless NetworksWhich device is primarily responsible for managing the association of clients in a wireless network?Understanding the Role of the Project Charter in Effective Project ManagementWhat document is typically created to launch a project?Understanding the Role of VPNs in Modern WLANsWhat are VPNs primarily used for in modern WLANs?Understanding the SKINNY Protocol in Network TrafficWhat does the presence of the SKINNY protocol in a network traffic capture indicate?Understanding the Swept Spectrogram in RF UtilizationIn a spectrum analyzer, which data chart identifies overall RF utilization of a specific frequency?Understanding the Wavelength of 802.11ac Radio WavesWhat is the approximate wavelength of an 802.11ac radio wave?Understanding Thermal Noise and Noise Floor CalculationsGiven a thermal noise of −174 dBm/Hz, what is the level of the noise floor when analyzed with a 1 kHz resolution bandwidth and a 5 dB noise figure?Understanding Throughput Improvement with 802.11ac APsWhat is the most likely reason for no throughput improvement after upgrading from 802.11n to 802.11ac APs?Understanding Transmit Power Levels in Wireless DesignWhat is the actual transmit power for an AP configured at a Tx Power Level of "4" if a Level of "1" is equivalent to 17 dBm?Understanding VLAN Assignment and IP Addressing in Wireless NetworksWhich method is NOT recommended for assigning IP addresses and VLANs to clients associated with the same AP?Understanding VLANs: Wireless vs. Wired DomainsWhat is a key difference between VLANs in wireless and wired domains?Understanding Voice-Enabled QoS and Its Impact on Network PerformanceWhen a voice-enabled QoS STA sends an IP data packet, what device maps the DSCP value to an IEEE 802.1Q priority tag value?Understanding Why 1 Mbps Signals Outperform 54 Mbps in Usable RangeWhy does a frame transmitted at 1 Mbps have a greater usable range than the same frame transmitted at 54 Mbps?Understanding Wi-Fi Interference: The Microwaves at LunchWhat is the most likely cause of intermittent Wi-Fi connectivity on the 2.4 GHz band during lunch hours?Understanding Wi-Fi Signal Strength and Channel Allocation in HotelsIn a hotel room, why might a business traveler experience low RSSI when connecting to the hotel’s Wi-Fi?Understanding Wireless Device Classification in Enterprise NetworksWhat is the standard method of classifying wireless devices in an enterprise network?Understanding Wireless Intrusion Prevention Systems (WIPS)Which functions may be performed by a Wireless Intrusion Prevention System (WIPS)?Understanding WLAN Capacity Issues: Power Solutions and ChallengesWhich option is the least effective response to capacity issues with client devices in a WLAN design?Understanding WLAN Discovery Methods: Active vs. Passive ScanningWhat are the two types of WLAN discovery or scanning methods?Understanding WLAN Discovery: Active vs. Passive Scanning MethodsWhat are the two types of WLAN discovery/scanning?Understanding WPA/WPA2-Enterprise: Is the Complexity Worth It?What is a significant drawback of WPA/WPA2-Enterprise compared to WPA/WPA2-Personal?Understanding WPA2-Enterprise: The Key to Tightening Your Network SecurityWhat additional step is performed during WPA2-Enterprise transitions that is not performed in WPA2-Personal transitions?Understanding WPA2/AES Enterprise: The Backbone of Voice Enterprise SecurityWhich type of authentication and encryption method is mandatory for Voice Enterprise certified devices as specified by the Wi-Fi Alliance?Unlocking the Mystery of DHCP Option 43 in WLANsWhat is the purpose of DHCP Option 43 in WLANs?Unpacking the Virtual BSSID: The Key to Effective WLAN CommunicationWhich type of addresses do all APs use to share communication in WLANs?USB 3.0 Hubs and Site Surveys: A Noisy EncounterWhat issue might arise when using a USB 3.0 hub during a site survey?What Happens When You Disable Lower Data Rates in 802.11n Networks?In a dual-band 802.11n deployment, what will result from disabling support for lower data rates while allowing higher ones?What Makes Wireless Network Security So Challenging?Which of the following is a challenge to maintaining security in wireless networks?What to Do When CAD Drawings Don’t Match RealityDuring a CAD drawing review, what is the appropriate action if inaccuracies are found?Why a DMZ is Essential for Guest Access in WLAN DesignIn what context is a DMZ typically used for guest access in WLAN design?Why Aesthetic Installations Matter in High-End Retail EnvironmentsWhat type of installation would benefit most from aesthetic installations?Why AP Placement Matters for VoWLAN SuccessFor best performance in a voice over WLAN (VoWLAN) deployment, which factor is most critical?Why Calibrating Measurements Matters in Wireless DesignWhat is the relevance of calibrating the longest available measurement in a floor plan?Why Calibration Matters in Predictive Wireless DesignWhat is the appropriate action to take after importing a floor plan into a predictive design tool, before adding APs?Why Client Upgrades Matter After Switching to 802.11ac APsAfter an upgrade from 802.11n APs to 802.11ac APs, what most likely caused no improvement in throughput?Why Conducting a Thorough Site Survey is Key for Your WLAN DesignWhich approach is recommended when user density exceeds the original WLAN design?Why Education Tops WLAN Enterprise VerticalsWhich of the following is considered one of the three biggest WLAN enterprise verticals?Why Engineering Feedback is Your Network's Best FriendWhat important item is often left out of operational and maintenance plans?Why Gigabit Ethernet Switches Remain Relevant for WLANsWhy is upgrading Gigabit Ethernet switches to MultiGig switches unnecessary for supporting 802.11ac and 802.11ax?Why Hiding Your SSID is a Smart Move for Business NetworksFor what purpose is SSID hiding generally useful?Why Involving End-Users is Key After WLAN ImplementationWho should be present at the final meeting after a WLAN implementation?Why iPerf is Essential for Throughput Testing in Wireless SurveysWhat is the primary purpose of using iPerf in surveys?Why Low Jitter is Key for Voice Applications in Wireless NetworksWhat is an important characteristic of a well-designed wireless network for voice applications?Why Mounting Access Points Above Ceilings Can Diminish WLAN PerformanceDuring installation, APs were mounted above the ceiling for aesthetic reasons. What should you do about this situation?Why NEMA Enclosures Are a Must for Outdoor AP DeploymentsWhen deploying APs outdoors, what additional component must be used that is not needed indoors?Why One SSID for Everyone Is a Smart MoveWhat is one reason for using a single SSID for both corporate users and guests?Why Segmenting Guest Traffic in WLAN Design MattersWhat role does segmentation of traffic play in a WLAN design for guest access?Why Short ASCII Passphrases Are Weak for WPA/WPA2 NetworksWhat issue is associated with short ASCII passphrases in WPA/WPA2-Personal networks?Why WPA/WPA2-Personal Might Be Your Best Bet in Certain Enterprise SituationsIn what situation is WPA/WPA2-Personal generally recommended for use in an enterprise environment?Why WPA2-Personal is Your Best Bet for Secure VoWiFi CommunicationWhich security solutions are recommended for VoWiFi communication in a low-latency environment without fast roaming protocols?Why You Should Think Twice Before Enabling DFS Channels in AirportsIn what circumstance would you not enable DFS channels on a WLAN infrastructure?Why Your Access Point Might Not Power Up with PoEWhat is the most likely reason an AP did not power up when using PoE?Why Your Wi-Fi Might Suffer Near That MicrowaveWhat issue might occur if an access point is located too close to a microwave oven?Your Essential Guide to Pre-Deployment RF Survey ScalingBefore performing a pre-deployment passive RF survey, what must be performed?Your Guide to Non-Disclosure Agreements (NDAs) and Their ImportanceYour customer is concerned about maintaining privacy for their proprietary information. Which document can you use to address their concern?

More practice questions

These questions are part of the practice quiz. Start practicing

What might limit the ability to locate 802.11 clients using WLAN infrastructure without an 802.11 tag?
What is the best protection mechanism for 802.11n clients working with 802.11b clients?
For what purpose is SSID hiding typically utilized?

Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy